Pipe::Scan

Drinking water quality monitoring in the network

The pipe::scan is a modular sensor system for monitoring drinking water quality in pipes under pressure. It measures up to 10 parameters in one device: TOC, DOC, UV254, Turbidity, Color, Chlorine, pH/Redox, Conductivity, Temperature and Pressure. The water quality data can be sent to any central database via almost any protocol. Multiple pipe::scans are the ideal solution to monitor drinking water at any point in the network.

• Accurate measurement in perfect agreement to standardized lab reference… not just ”trending”
• Organics and Turbidity monitoring
• Totally flow-independent, even works under stagnating conditions
• Hot-maintenance: without interrupting the flow/pressure, and for each sensor individually
• Full-scale event detection with real-time alarms within the drinking water distribution network
• 6 months service time: Efficient, reliable stand-alone operation without maintenance

ACS drinking water certified

The pipe::scan has been ACS drinking water certified by the independent French institute CARSO, which is accredited by the French Ministry of Health to evaluate, test and certify materials and products which are in contact with water intended for human consumption. The Attestation de Conformité Sanitaire (ACS) is the Certificate of Sanitary Conformity that ensures all materials used in a product and in contact with water are safe.

Ammo::lyser Pro

A multi-parameter probe for the online measurement of ammonium. It is an absolutely reliable device outclassing conventional analyzers in terms of measurement stability and lifetime. Precision is guaranteed by real time compensation of the ammonium value with temperature, pH and potassium and a high performance reference electrode.

ammo::lyser™ III pro: monitors NH4-N and temperature
ammo::lyser™ IV pro+pH monitors NH4-N, temperature and pH (with potassium compensation)
ammo::lyser™ IV pro+NO3-N monitors NH4-N, temperature and NO3-N (with potassium compensation)

• s::can plug & measure
• measuring principle: ISE (ionselective electrodes) – with optional potassium compensation
• multiparameter probe
• long term stable, factory precalibrated
• automatic cleaning with compressed air
• unique, non-porous / non-leaking reference electrode for technically unrivalled and consistent performance
• ISE refurbishment – the easy way to minimise maintenance
• easy & quick mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
• operation via s::can terminals & s::can software
• automatical temperature compensation, pH compensation possible
• ideal for surface water, ground water and drinking water, also for applications in waste water
• minimal maintenance
• life time of ISE: typically 6 month (for applications <1mg/l NH4-N), resp. 1 to 2 years (for applications >1mg/l NH4-N)

 

Ammo::lyser Eco

A multi-parameter probe for the online measurement of ammonium. It is an absolutely reliable device outclassing conventional analyzers in terms of measurement stability and lifetime. Precision is guaranteed by real time compensation of the ammonium value with temperature, pH and potassium and a high performance reference electrode.

ammo::lyser II eco: monitors NH4-N and temperature
ammo::lyser III eco+pH: monitors additionally pH
ammo::lyser III eco+NO3-N: monitors additionally NO3-N
ammo::lyser III eco+Cl-: Monitors additionally Chloride
ammo::lyser IV eco+pH+NO3-N: monitors additionally pH and NO3-N
ammo::lyser IV eco+pH+Cl-: Monitors additionally pH and chloride

• s::can plug & measure
• measuring principle: ISE (ionselective electrodes) – with optional potassium compensation
• multiparameter probe
• long term stable, factory precalibrated
• automatic cleaning with compressed air
• unique, non-porous / non-leaking reference electrode for technically unrivalled and consistent performance
• ISE refurbishment – the easy way to minimise maintenance
• easy & quick mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
• operation via s::can terminals & s::can software
• automatical temperature compensation, pH compensation possible
• ideal for surface water, ground water and drinking water, also for applications in waste water
• minimal maintenance
• life time of ISE: typically 6 month (for applications <1mg/l NH4-N), resp. 1 to 2 years (for applications >1mg/l NH4-N)

 

Chlori::lyser

The chlori::lyser is a revolutionary pH- and flow-independent sensor for monitoring free chlorine or total chlorine. Its internal buffer electrolyte allows pH-independent measurement between pH 4 to 10+, and its 3-electrode system provides extremely stable readings. High precision is ensured even at high fluctuations of pH, temperature and flow.

Chlori::lyser™ monitors free chlorine (Cl2 + HOCl + OCl-) or total chlorine (free chlorine + combined chlorine)

• s::can plug & measure
• measuring principle: amperometric (membrane covered)
• ideal for drinking water
• long term stable and lowest maintenance in operation
• replacement of membrane only once a year
• readings stable at high fluctuations of pH, temperature and flow
• compensates fluctuations of pH in an unmatched way
• pH range from 4 to 10 FCl
• pH range from 4 to 12 TCl
• low cross sensitivity to many surfactants
• cross sensitivities to chlorine dioxide, ozone can be compensated by using readings from spectro::lyser™
• factory zero point precalibrated
• mounting and measurement in flow cell
• operation via s::can terminals & s::can software

 

Chlodi::lyser

The chlodi::lyser is an amperometric sensor for monitoring chlorine dioxide. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated and the chlodi::lyser is not cross sensitive to chlorine.

Chlodi::lyser measures chlorine dioxide

• s::can plug & measure
• measuring principle: amperometric (membrane covered)
• ideal for all kinds of water treatment
• long term stable and lowest maintenance in operation
• replacement of membrane only once a year
• readings stable even at high fluctuations of pH, temperature and flow
• strong surfactants are tolerated
• not cross sensitive to chlorine
• factory precalibrated
• mounting and measurement in a flow cell
• operation via s::can terminals & s::can software
• additionally also measures temperature

 

Hyper::lyser

The hyper::lyser is an amperometric sensor for monitoring hydrogen peroxide. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated.

• s::can plug & measure
• measuring principle: amperometric (membrane covered)
• ideal for all kinds of water treatment
• long term stable and lowest maintenance in operation
• replacement of membrane only once a year
• readings stable even at high fluctuations of pH, temperature and flow
• strong surfactants are tolerated
• factory precalibrated
• mounting and measurement in a flow cell
• operation via s::can terminals & s::can software
• additionally also measures temperature

 

Peroxy::lyser

The peroxy::lyser is an amperometric sensor for monitoring peracetic acid. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated and the peroxy::lyser is not cross sensitive to high concentrations of hydrogen peroxide.

• s::can plug & measure
• measuring principle: amperometric (membrane covered)
• ideal for all kinds of water treatment
• long term stable and lowest maintenance in operation
• replacement of membrane only once a year
• readings stable even at high fluctuations of pH, temperature and flow
• strong surfactants are tolerated
• not cross sensitive to high concentrations of hydrogen peroxide
• factory precalibrated
• mounting and measurement in a flow cell
• operation via s::can terminals & s::can software
• additionally also measures temperature

 

Condu::lyser

The condu::lyser is a maintenance-free and long-term stable probe for online measurement of conductivity, automatically compensated with temperature. It can be mounted directly in the media or in a flow cell providing high precision by either conductive or inductive measurement. Thanks to the high measurement range it is ideal for all varieties of water.

• s::can plug & measure
• measurement principle condu::lyser: 4 electrode contacting measurement
• multiparameter sensor
• ideal for surface water, ground water, drinking water and waste water
• condu::lyser monitors conductivity, temperature and salinity
• long term stable and maintenance free in operation
• high temperature, pressure and measuring range
• factory precalibrated
• mounting and measurement directly in the media (InSitu) or in a flow cell
• operation via s::can terminals & s::can software
• 2 versions available:
  sensor with plug connector for use in stations
  sensor with fixed cable for submersion
• optional: automatic cleaning with compressed air

 

Redo::lyser

The redo::lyser is a long-term stable and maintenance free sensor for the online measurement of the redox potential immersed in the medium or in a flow cell. Thanks to a groundbreaking reference electrode, high precision is guaranteed in virtually any medium and under harshest conditions. It is pre-calibrated ex works and immediately ready for use.

redo::lyser eco monitors ORP & temperature
redo::lyser pro: high temperature range

•  s::can plug & measure
• measuring principle: unique, non-porous / non-leaking combined reference electrode for technically unrivalled and consistent ORP performance
• multiparameter sensor
• ideal for surface water, ground water and drinking water, also waste water
• long term stable and maintenance free in operation
• factory precalibrated
• mounting and measurement directly in the media (InSitu) or in Bypass
• operation via s::can terminals & s::can software

 

PH::lyser

The pH::lyser is a maintenance-free sensor for the real-time measurement of pH and temperature directly in the medium or in a flow-cell. Even under tough conditions (up to 90°C) or in water with very low conductivity long term stability and precise measurement is ensured. The sensor is pre-calibrated ex works and immediately ready.

pH::lyser eco monitors pH & temperature
pH::lyser pro: high temperature and pH range

• s::can plug & measure
• measuring principle: unique, non-porous / non-leaking combined reference electrode for technically unrivalled and consistent pH performance
• multiparameter sensor
• ideal for surface water, ground water, drinking water and waste water
• long term stable and maintenance free in operation
• factory precalibrated
• mounting and measurement directly in the media (InSitu) or in flow cell
• operation via s::can terminals & s::can software
• optional: automatic cleaning with compressed air

 

“Why do we measure”
Drinking water suppliers use the pH::lyser for the continuous process monitoring and control of chemical and physical treatment steps that are characterised by changes in pH, such as neutralisation, flocculation, mixing of source waters. Furthermore, the pH::lyser is applied in early warning systems that monitor source water quality, both in ground and surface water.

“How do we measure”
is a multi-parameter probe that measures the pH value and temperature directly in the water. The pH::lyser uses the temperature to correct the result of the pH measurement online. The non-porous, solid-state reference electrode ensures excellent pH readings and a long lifetime of the electrode.

 

Fluor::lyser

The fluor::lyser is an ion-selective measuring device designed for the continuous monitoring of the concentration of fluor (F) dissolved in water. Also the instrument continuously measures the temperature of the medium and corrects the measured concentration accordingly. For proper usage the probe has to be connected to an s::can controller, i.e. a con::cube.

Fluor::lyser monitors fluoride and temperature

•  s::can plug & measure
• measuring principle: ISE (ionenselektive elektrodes)
• no cross sensitivities in typical drinking water applications
• multiparameter probe
• long term stable, factory precalibrated
• automatic cleaning with compressed air
• easy and quick mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
• operation via s::can terminals & s::can software
• ideal for drinking water
• minimal maintenance

 

Soli::lyser

The soli::lyser is an optical probe that measures concentrations of suspended solids directly in the water. It integrates the temperature measurement for online correction. Using the principle of infrared absorbance, the readings are not affected by colors. The soli::lyser utilizes an automatic cleaning system that uses compressed air for removal of fouling.

Soli::lyser monitors TSS (MLSS)

•  s::can plug & measure 
•  measuring principle: optical (infrared absorbance)
• ideal for waste water
• long term stable and maintenance free in operation
• factory pre-calibrated (2 measuring ranges available)
• automatic cleaning with compressed air
• mounting and measurement directly in the media (InSitu) or in flow cell
• operation via s::can terminals & s::can software
• minimal maintenance (no waste parts)
• most cost efficient sensor, cost of ownership is unmatched

con::cube V3

con::cube – a compact, versatile terminal for data acquisition and station control. Newest processor technology and very flexible options for interfacing to SCADA or any central database systems makes the con::cube in combination with moni::tool a powerful terminal for compact station control.

• s::can high-end IoT (Internet of Things) terminal based on an industrial PC, IP65
• wide screen color graphical display (9”) and touch screen
• highly intuitive use, informative visualization & easy operation: time series, optical spectra and all events in clear text
• sensor and station management of up to 64 parameters: automatic cleaning, data logging, sample & calibration incl. history and multipoint calibration, sensor function check, user management, easy data transfer via USB-stick
  
• low power operation with less than 3 watt (@ 15 min. measuring interval): wide range AC and DC variants available
• IoT (Internet of Things) and M2M (Machine to Machine) connectivity: 1 Gb/s Ethernet, 300 Mb/s Wi-Fi 802.11a/b/g/n and optional worldwide HSPA+ 3G interface, remote control (http), data transfer into cloud via FTP, SSH and TML
• process interface to SCADA via: Modbus RTU/TCP, SDI-12, Profibus DP, analog 0/4-20mA and relay outputs (state)
• integration of third party sensors via: analog 0/4-20 mA and digital (solid state) inputs, Modbus RTU/TCP
• easily extendable: 8 slots to customize I/Os, moni::tool software pre-installed, additional software features like online data validation and event detection optional.

 

con::lyte

The terminal con::lyte displays the readings of all s::can probes & sensors connected on site via backlight LCD. Seven push buttons are available to ensure operation and changing of settings via software, which is optimized in respect of user-friendly operation and operational safety.

• s::can low-cost terminal designed for control applications
• power efficient LCD display and ergonomic user interface
• sensor and station management of up to 2 (eco) or 6 (pro) parameters
• control of automatic cleaning, data logging, sample & calibration, sensor function check and easy data transfer via USB-stick
• process interface to SCADA or con::cube via Modbus RTU, Profibus DP, analog 4-20 mA and relay outputs (state/PWM/Pulse)
• integration of third-party sensors via analog 0/4-20 mA input and digital (solid state/count) inputs
• outstanding control features: easy threshold and alarm limits with hysteresis, 3 optional PID or 2-point controllers
• certifications: CE, UL, CSA and RCM

 

Io::Tool

Intuitive web interface for data visualization and configuration of the spectro::lyser V3.

• View all your data at a glance on your mobile device
• Io::Tool visualizes measurement data, time series, fingerprints and status information
• Configure your spectro::lyser, install new parameters, and perform calibrations

 

 

 

 

visu::tool

Visu::tool is a fast and easy-to-use data visualization software for PCs and notebooks. In 3 simple steps you can visualize huge amounts of data from con::cube or con::lyte into single or multiple graphs. The visu::tool “lyte” version is available for free download. The advanced visu::tool “pro” version includes a vast amount of additional useful offline features such as data aggregation, fingerprint plots, parameter correlation and is now available for sale.

• Read s::can files (.log, .par, .csv, .xlsx and .fp files)
• Graphical user interface for parameter selection
• Plot selected parameter or fingerprint data coming from your s::can probe
• Save data as Excel
• Create customized reports (sensor health report, drift detection, event detection)

 

moni::tool

moni::tool is a revolutionary new platform for the management of an almost unlimited number of stations, online probes, analyzers and parameters. Intuitive operation – on site or remote – and reams of valuable features make moni::tool essential for state of the art sensor and station management.

micro::station for drinking water

The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel.

The fully modular micro::station combines s::can instruments to a compact and versatile system. It presents a complete solution, as the user only has to connect water supply and -discharge (“plug & measure”) to receive a previously unheard variety of immediately available information and parameters at no extra cost.

The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can sensors and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel.

 

 

micro::station for waste water

The s::can micro::station for waste water is designed for online monitoring of water quality parameters in waste water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipes on a compact panel. The fully modular micro::station combines s::can instruments to a compact and versatile system. It presents a complete solution, as the user only has to connect water supply and -discharge (“plug & measure”) in order to receive at no extra cost a previously unheard variety of immediately available information and parameters.

 

 

 

 

 

nano::station

The fully modular nano::station combines s::can instruments to a super-compact and versatile system. It presents a complete solution, as the user only has to connect water supply and -discharge in order to receive at no extra cost a previously unheard variety of immediately available information and parameters. The s::can nano::station offers a monitoring solution for many different applications: From very cost sensitive application down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection.

The required components – i::scan, s::can probes and s::can controller – are factory assembled with required flow cells, mounting fittings and pipework on a super-compact panel.

 

 

 

 

Extension Cable For S::Can Spectrometer Probes

• Extension of probe cable
• IP 67 plug connection
• Flexible adjustment to local conditions

Technical Specification
Cable length: 10, 20 or 30 m
Assembling: ex works
Housing material: jacket: PU
Protection class: IP 67
interface connection to s::can spectrometric probes: MIL 10P, IP 67, RS485, 12 VDC
Part Numbers
C-210-spectro (10 m)
C-220-spectro (20 m)
C-230-spectro (30 m)  

 

Flow Cell – For Pathlength 100 Mm

• For proper and easy flow-through installation of s::can spectrometer probes
• For applications without automatic cleaning
• OPL 100 mm

Technical Specification
Housing material: POM-C
Dimensions (diameter x length): 74 x 196 mm
Weight (min.): 800 g
Process connection: G 1/2”, hose nozzle 12mm
Installation / mounting: flow cell
Operating temperature: 0 … 60 °C
Operating pressure: 0 … 6 bar
Part number: F-445-2

 

Carrier S::Can Spectrometer Probe

• For proper and easy submersed installation of s::can spectrometer probes
• Probe cable and pressure hose compatible
• Mounting with pipe (AD 50 mm)

Technical Specification
Housing material: PVC and POM-C
Dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510 mm (for F-120-spectro)
Weight (min.): 900 g
Process connection: ID 50 mm
Installation / mounting: submersed
Part number: F-110-spectro (for horizontal attachment)
Part number: F-120-spectro (for vertical attachment)

Recommended accessories
F-15 fixing adapter – stainless steel

 

Multifunctional Slide For Pathlength 100 Mm

• for referencing of spectrometer probes
• for pathlength 100 mm
• for spectral measurement in laboratory

technical specification
dimensions (diameter x length): 60 x 160 mm (outside)
installation / mounting: for 100 mm
part number: E-421-2

 

 

 

Multifunctional Slide For Pathlengths From 0.5 Mm To 35 Mm

• For referencing of spectrometer probes
• For pathlength 0.5 – 35 mm
• For spectral measurement in laboratory

Technical Specification
Dimensions (diameter x length): 60 x 100 mm (outside)
Installation / mounting: for 0.5 mm to 35 mm
Part number: E-421-1

 

 

Flow Cell – For Pathlengths From 0.5 Mm To 35 Mm

• For proper and easy flow-through installation of s::can spectrometer probes
• For applications without automatic cleaning
• OPL 0.5 … 35 mm

Technical Specification
Housing material: POM-C
Dimensions (diameter x length): 74 x 132 mm
Weight (min.): 450 g
Process connection: G 1/2”, hose nozzle 12mm
Installation / mounting: flow cell
Operating temperature 0 … 60 °C
Operating pressure: 0 … 6 bar
Part number: F-445-1

 

Inserts For Spectrometer, Stainless Steel, Saphire Windows

• For adaption or repair the optical path length of s::can spectrometer probes
• Stainless steel (ISO 1.4404), suitable for 35/5/2/1/0,5 mm OPL
• Incl. sealings, saphire measurment windows and service tools
• Expert service by s::can Salespartner required; for permanent application!

Part Numbers
A-500-s (for optical pathlength 0.5 mm)
A-001-s (for optical pathlength 1 mm)
A-002-s (for optical pathlength 2 mm)
A-005-s (for optical pathlength 5 mm)
A-015-s (for optical pathlength 15 mm)

 

Ammonium Electrode For Ammo::Lyser™

Technical Specification
Dimensions (diameter x length): 20 x 145 mm
Weight (min.): 100 g
Protection class: IP 68 (mounted in housing)
Part number: E-534-ise-NH4 (for ammo::lyser V1, spare part)
E-535-ise-NH4 (for ammo::lyser V2, spare part)

 

 

Flow Cell For Ise Probe (Waste Water)

• For proper and easy flow-through installation of ammo::lyser in wastewater

Technical specification
Housing material: PVC
Dimensions : 177 x 83 x 108 mm
Part Number: F-48-ammo

 

 

Ph Electrode For Ammo::Lyser™

Technical Specification
Part number: E-532-ise-pH (for ammo::lyser V1, spare part new)
E-533-ise-pH (for ammo::lyser V2, spare part new)

 

 

 

 

Potassium Electrode For Ammo::Lyser™

Technical Specification
Dimensions (diameter x length): 20 x 145 mm
Weight (min.): 100 g
Protection class: IP 68 (mounted in housing)
Part number: E-532-ise-K (for amm::lyser V1, spare part)
E-533-ise-K (for ammo::lyser V2, spare part)

 

Reference Electrode For Ammo::Lyser™

• long life time (typically 3 years)
• non-porous, solid state electrode
• smaller drift than conventional electrodes

technical specification
dimensions (diameter x length): 20 x 145 mm
weight (min.): 100 g
protection class: IP 68 (mounted in housing)
part number: E-532-ise-ref (for ammo::lyser V1, spare part)
E-533-ise-ref (for ammo::lyser V2, spare part)

 

Flow Cell – For Spectrometer Probe (Waste Water)

• For proper and easy flow-through installation of one spectrometer probe in waste water applications

Technical Specifications
Housing material: PVC
Dimensions (lenght x width x height): 177 x 83 x 90 mm
Process connection: 1″ inside thread
Installation / mounting: flow cell
Recomended flow: < 40 l/min
Part number: F-48-V3

 

S::CAN Compressor

• Provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
• Removal of fouling using compressed air
  
• Aluminium housing IP65 for wall mounting
  
• Optional 12 VDC or 110 VAC version available
• Railing-mounting set available

Technical Specification
Power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
Power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
Power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
Assembling: ex works
Housing material: aluminium
Dimensions (width x height x depth): 218 x 253 x 105 mm
Weight (min.): 4.9 kg
Process connection: 1/4
Installation / mounting: Mounting bracket d6 / 0.25 dia
Operating temperature: -10 … 40 °C
Operating pressure: 0 … 6 bar
Ingress protection class: IP 65
Tank volume: 0.4 l
Charging time: typ. 25 sec
Sound emission: 60dB(A)
Service interval: 1500 operating hours
Storage temperature: -10 … 60 °C
Storage humidity: 0 … 95%
Part number: B-32-230, B-32-110, B-32-012

Recommended Accessories
B-44 cleaning valve
B-44-2 cleaning valve
C-31-eu optional 2 m power cable
C-31-us optional 2 m power cable

 

Extension Cable For S::Can Sensors And S::Can Ise Probes

• Extension of sensor cable
• IP 68 plug connection
• Flexible adjustment to local conditions

 Technical Specification

Cable length: 10, 20 or 30 m
Assembling: ex works
Housing material: jacket: PU
Protection class: IP 68
Interface connection to s::can sensors:

Part Numbers
C-210-sensor (10 m)
C-220-sensor (20 m)
C-230-sensor (30 m)

 

I::Scan Flow Cell For I::Scan And Up To 3 Additional S::Can Probes

• For proper and easy flow-through installation of one i::scan and up to three s::scan physical probes 
• Automatic cleaning with autobrush for i::scan available (optional)

Technical specification
Housing material: POM-C
Dimensions (diameter x length): 106 x 103
Weight (min.): 1 kg (without autobrush)
Process connection: G 1/4″, hose nozzle 7mm
Installation / mounting: flow cell
Operating temperature: 0 … 50 °C
Operating pressure: 0 … 6 bar
Part number: F-46-four-iscan

Recommended Accessories
F-501-eco-us System Panel micro::station US
F-501-eco-eu System Panel micro::station EU
F-45-process process connection 1/4″ G
F-45-fl ow-1 Automatic flow control unit
F-45-strain Inlet strainer
F-446-m-iscan i::scan autobrush for F-46-flow cells

 

Carrier S::Can Sensors

• For proper and easy submersed installation of an s::can sensor
• Sensor cable and pressure hose compatible
• Mounting with pipe (AD 50 mm)

Technical Specification
Housing material: PVC and stainless steel
Dimensions (diameter x length): 85 x 86 mm
Weight (min.): 300 g
Process connection: ID 50 mm
Installation / mounting: submersed

Part Number
F-11-oxi-ammo: for oxi::lyser, soli::lyser, ammo::lyser, fluor::lyser
F-12-sensor: for condu::lyser, redo::lyser, pH::lyser

Recommended Accessories
F-15 fixing adapter – stainless steel

• For proper and easy submersed installation of an s::can sensor
• Sensor cable and pressure hose compatible
• Mounting with pipe (AD 50 mm)

Technical Specification
Housing material: PVC and stainless steel
Dimensions (diameter x length): 85 x 86 mm
Weight (min.): 300 g
Process connection: ID 50 mm
Installation / mounting: submersed

Part number
F-11-oxi-ammo: for oxi::lyser, soli::lyser, ammo::lyser, fluor::lyser
F-12-sensor: for condu::lyser, redo::lyser, pH::lyser

Recommended accessories
F-15 fixing adapter – stainless steel

 

Flow Cell For Four S::Can Physical Probes

 

• For proper and easy flow-through installation of condu::lyser, chlori::lyser, redo::lyser and pH::lyser 
• For applications without automatic cleaning in drinking water

Technical Specification
Housing material: POM-C
Dimensions (diameter x length): 106 x 103
Weight (min.): 1.05 kg
Process connection: G 1/4″, hose nozzle 7mm
Installation / mounting: flow cell
Operating temperature: 0 … 50 °C
Operating pressure: 0 … 6 bar
Part number: F-45-four

Recommended Accessories
F-501-eco-us System Panel micro::station US
F-501-eco-eu System Panel micro::station EU
F-45-process process connection 1/4″ G
F-45-flow-1 Automatic flow control unit
F-45-strain Inlet strainer

 

Power Cord For Con::Cube And Con::Lyte

• Optional 2 m power cable for s::can terminals

Technical Specification
Cable length: 2 m
Assembling: ex works
Housing material: jacket: PU
Process connection: CEE-7 shockproof plug
Protection class: IP 44
Sales region: Europe
Part number: C-31-eu 

 

Weather Shield For S::Can Terminals

• For protection against severe weather conditions
• Transparent cover plate available (optional)
  
• Mounting prepared for con::cube or con::lyte
  
• For mounting on walls or railings
• Incl. mounting device for diameter 40-63mm
  

Technical Specification
Housing Material: stainless steel
Dimensions (width x height x depth): 363 x 553 x 170 mm
Weight (min.): 5 kg
Part number: F-51

 

FIELD CASE

• Stand-alone operation of s::can spectrometer probes
• No on-site power supply necessary
• For remote monitoring tasks without infrastructure

Technical Specification
Power supply: 12 VDC nominal
Assembling: ex works
Housing material: PP
Dimensions (width x height x depth): 270 x 175 x 245 mm
Protection class: IP 65
Interface connection to s::can spectrometric probes: via con::nect: M12, IP 67, free leads, 2 m
Interface connection to s::can sensors: via con::nect: M12, IP 67, free leads, 2 m
Part number: C-14

 

Flow Cell Autobrush – For Spectro::Lyser Pathlength 35 Mm

• For proper and easy flow-through installation of s::can spectrometer probes
• For applications with frequent, automatic cleaning
• Cleaning of optical windows with rotating brush without demounting of spectrometer probe
• OPL 35 mm

Technical Specification
Power supply: 12 VDC
Assembling: ex works
Housing material: POM-C
Dimensions (width x height x depth): 74 x 132 x 153 mm
Weight (min.): 900 g
Process connection: G 1/4”
Installation / mounting: flow cell
Operating temperature: 0 … 40 °C
Operating pressure: 0 … 6 bar
Protection class: IP 66
Part number: F-446-1

 

Cleaning Agent

• Supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
• Chemical removal of persistent window fouling
• Very effective for grease and organic fouling

Technical Specification
Weight (min.): 1.3 kg
Part number: B-61-1

 

Cleaning Brush

• Supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
• Mechanical removal of persistent window fouling
• For pathlength 2, 5 or 15 mm

Technical Specification
Dimensions (diameter x length): length 200 mm
Weight (min.): 1 g
Part number: B-60-1 for 2 mm
Part number: B-60-2 for 5 or 15 mm

Cleaning Valve

• Supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
• Removal of fouling, sediments and clogging using
  
• Compressed air or water
• Version B-44-2 specially for use in comibination with the s::can compressor

Technical Specification
Cable length: 2.4 m (B-44); 1 m (B-44-2)
Assembling: ex works
Dimensions (width x height x depth): 85 x 75 x 70 mm
Weight (min.): 500 g
Process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8″; B-44-2: pressure side quick coupling d6x4, at Sensor direction push-pull d6x4
Protection class: IP 65
Part number: B-44 or B-44-2

Recommended Accessories
B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
B-41-spectro: pressure connection replacement set s:.can spectrometer probe

 

Electronic Battery Charger

• Charging device for s::can field case

Technical Specification

Power supply: 230 VAC
Housing material: ABS
Dimensions (width x height x depth): 65 x 160 x 55 mm
Protection class: IP 20
Part number: C-15

 

 

External Antenna For Con::Cube

Part number:
D-315-antenna

 

 

 

Fixing Adapter – Stainless Steel

• Supports the proper and easy installation of s::can systems
• Quick mounting and demounting of InSitu installed s::can probes and sensors

Technical Specification
Housing material: stainless steel
Weight (min.): 2.6 kg
Process connection: ID 50 mm
Part number: F-15

Recommended Accessories
F-14-3 mounting pipe – stainless steel

 

Flow Cell Autobrush – For Spectro::Lyser Pathlength 100 Mm

• For proper and easy flow-through installation of s::can spectrometer probes
• For applications with frequent, automatic cleaning
  
• Cleaning of optical windows with rotating brush without demounting of spectrometer probes
• OPL 100 mm

Technical specification
Power supply: 12 VDC
Assembling: ex works
Housing material: POM-C
Dimensions: (width x height x depth) 74 x 196 x 153 mm
Weight (min.): 1.7 kg
Process connection: G 1/4”
Installation / mounting: flow cell
Operating temperature: 0 … 40 °C
Operating pressure: 0 … 6 bar
Protection class: IP 66
Part number: F-446-2

 

Flow Cell For i::scan (Waste Water)

• For proper and easy flow-through installation of one i::scan in waste water application
  

Technical Specifications 
Housing material: PVC
Dimensions (lenght x width x height): 177 x 83 x 90 mm
Process connection: 1″ inside thread
Installation / mounting: flow cell
Recommended flow: < 40 l/min
Part number: F-48-iscan

 

Pressure Connection Replacement Set

• Simple and proper supply of compressed air for cleaning
  
• Compatible with certain s::can flow cell fittings

Technical Specification
Cable length: 3 m
Assembling: ex works
Housing material: jacket PU, connection nozzle in nickel-plated brass (for spectrometer probes: fitting PP)
Process connection: 3/8”
Operating pressure: 1 … 6 bar
Part number: B-41-sensor (for ammo::lyser™, oxi::lyser™ and soli::lyser)
Part number: B-41-spectro (for s::can spectrometer probes)

 

Pressure mounting for i::scan in-pipe Installation (i::scan removal under pressure)

• For proper and easy installation of one i::scan in a pressure pipe
• Under pressure drilling of pipes possible (for PE, PVC, DCI, steel and AC pipes)
• The i::scan can be mounted and demounted under pressure without interuption of the water flow

Technical Specification
Housing material:stainless steel
Dimensions (height): 550 m (max.)
Weight (min.): 5 kg
Process connection: Hawle shut off saddle with a O ring DN 50 – DN 300 (others on request)
Operating pressure: 0 … 12 bar
Part number: F-160-iscan

 

 

Ruck::Sack

• Submersible Autobrush for spectrometer probes and i::scan
• Exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm
• One Basis module (motor unit) for all Versions
• Shelter protects the brush from clogging

Technical Specification
Power supply: 12 VDC
Power consumption (typical): 150 mA (average)
Power consumption (max.): 300 mA
Cable length: 7.5 m
Housing material: POM-C
Dimensions (width x height x xdepth): 182 x 46 x 36.5 mm
Weight (min.): 750 g
Installation / mounting: submersed
Operating pressure 0 … 0.5 bar
Ingress protection class: IP68
Storage temperature: -20 … 80 °C
Storage humidity: 0 … 95 %

 

Part Numbers
F-146-rs-35: ruck::sack submersible AutoBrush for spectro::lyser 35 mm
F-146-rs-15: ruck::sack submersible AutoBrush for spectro::lyser 15 mm
F-146-rs-05: ruck::sack submersible AutoBrush for spectro::lyser 5 mm
F-146-rs-iscan-35: ruck::sack submersible AutoBrush for i::scan 35 mm
F-146-rs-iscan-05: ruck::sack submersible AutoBrush for i::scan 5 mm

 

Recommended Accessoires
F-146-brush-35: Brush for ruck::sack – 35 mm spectro::lyser (spare part)
F-146-brush-15: Brush for ruck::sack – 15 mm spectro::lyser (spare part)
F-146-brush-05: Brush for ruck::sack – 5 mm spectro::lyser (spare part)
F-146-brush-iscan-35: Brush for ruck::sack – 35 mm i::scan (spare part)
F-146-brush-iscan-05: Brush for ruck::sack – 5 mm i::scan (spare part)

 

Simple Flow Cell – For Pathlength 100 mm

• For proper and easy flow-through installation of s::can spectrometer probes
• For applications without automatic cleaning
• OPL 100 mm

Technical Specification
Housing material: POM-C
Dimensions (diameter x length): 60 x 160 mm
Weight (min.): 300 g
Process connection: G 1/4”, hose nozzle 7mm
Installation / mounting: flow cell
Operating temperature: 0 … 45 °C
Operating pressure: 0 … 1 bar
Part number: F-442-2

 

Single Flow-Cell (By-Pass Fitting), Pom-C (For i::scan)

• For proper and easy flow-through installation of one i::scan
• Automatic cleaning with autobrush for i::scan available (optional)

Technical Specification
Housing material: POM-C
Dimensions (diameter x length): 70 x 86
process connection: G 1/4″, hose nozzle 7mm
installation / mounting: flow cell
Operating temperature: 0 … 50 °C
Operating pressure: 0 … 6 bar
Part number: F-46-iscan (without autobrush)
Part number: F-446-iscan (with autobrush)

Recommended Accessories
F-501-eco-us System Panel micro::station US
F-501-eco-eu System Panel micro::station EU
F-45-process process connection 1/4″ G
F-45-flow-1 Automatic flow control unit
F-45-strain Inlet strainer
F-446-m-iscan i::scan autobrush for F-46-flow cells

 

Flow Cell for Sensors (Waste Water)

• For proper and easy installation of s::can sensors (pH::lyser, redo::lyser or condu::lyser) in wastewater

Technical Specification
Housing material: PVC
Dimensions : 177 x 95 x 111 mm
Part Number: F-48-sensor

 

 

i::scan Carrier

For easy attachment of one i::scan

Technical Specification 
Housing Material: PVC, POM-C
Dimensions (diameter x lenght): 58 x 115 (without connection fitting)
Installation / mounting: submersed

Part Numbers
F-110-iscan: carrier for i::scan, for easy horizontal attachment
F-120-iscan: carrier for i::scan, for easy vertical attachment
F-130-iscan: carrier for i::scan, for easy 45° attachment